Cen-Tec Systems 95237 Quick Click Expanded Power Tool Adapter Set za zbiranje prahu, črn Expanded Adapter Set

Name: Cen-Tec Systems 95237 Quick Click Expanded Power Tool Adapter Set za zbiranje prahu, črn Expanded Adapter Set
Brand: Cen-Tec Systems
SKU: 0810178032327
Price: 74.85 EUR
Availability: InStock

Brand:Cen-Tec Systems

3.5/5

€
74.85

Razširjen komplet napajalnikov več blagovnih znamk Cen-Tec Systems je zasnovan tako, da poveže široko paleto večjih blagovnih znamk električnih orodij z vakuumom vaše domače trgovine za zbiranje smeti in prahu, ki nastanejo med uporabo električnega orodja, ter ohranja vas in vašo trgovino čisti, hkrati pa vas ščiti pred delci v zraku, ki lahko škodujejo vašemu zdravju. Adapterji so zasnovani tako, da so vsestranski z najbolj edinstvenimi in tipičnimi povezavami za orodno industrijo. Notranji obroč s trpežno acetalno sponko se neposredno poveže z večino blagovnih znamk brusilnikov za suho steno in drugih orodij, ki ustvarjajo velike količine prahu ali imajo velike profile smeti. Bajonetni nastavek z 1 mehkim TPE oblikovanim nastavkom je popoln za priključke majhnih električnih orodij. Gladko vrtenje bajoneta za 360 stopinj preprečuje zvijanje cevi ali upiranje prostemu gibanju električnega orodja. Prehod z nastavka 1 na nastavek 1 ½” iz mehkega TPE, ki je priljubljen na mnogih žagah za sekanje in rezkalnikih, z uporabo sistema hitre sponke traja le sekundo. Nadaljnji adapterji, vključeni v ta razširjen komplet, so ¾” in 1-1/4, ki se prilegajo dodatnim znamkam orodij in pokrovov. Končno je v bajonetnem nastavku oblikovana zračna razbremenitev, ki omogoča nastavitev zračnega toka na orodju, kot je potrebno, da se prepreči tesnjenje orodja na delovno površino. Končni priloženi adapter je dodatni 2 ½ standardni adapter za mokro/suho sesanje v adapter za hitro povezavo. To omogoča 2 ½ manšete v celotnem sistemu za delo z delovnimi postajami za zbiranje prahu, ki se pogosto uporabljajo z namiznimi žagami.

Znesek

Dodaj v voziček Kupi zdaj

EAN: 0810178032327

kategorije Orodja in pripomočki za dom, Močno in ročno orodje,

Mehak TPE nastavka omogoča, da se nastavek oblikuje v obliki izpušne odprtine izbranega električnega orodja. Komplet adapterjev je združljiv samo z 1-1/4 navojno cevjo, odporno proti udarcem, ni združljiv s priloženo pihano oblikovano cevjo, ki je standardno dobavljena z večino blagovnih znamk sesalnikov za trgovino. Združljiv z naslednjimi adapterji in cevmi Cen-Tec 94511, 94522, 94434, 95193, 95204, 95215. Komplet je antistatičen in zagotavlja okolje brez udarcev za ozemljene sesalnike in cevi. Zasnovano tako, da se prilega večini glavnih blagovnih znamk električnih orodij in delovnih pokrovov, vključno s Skill Bosch, Ryobi, Makita, Dewalt, Festool, Fein, Cobalt, Porter Cable, Hitachi in Milwaukee Electric. Priložen je sistem hitrega klikanja za povezavo z izpušno odprtino na vseh večjih znamkah ročnih in stacionarnih električnih orodij. Objemka s sponskim obročem in bajonetni priključki z ¾” 1” 1-1/4” 1-½” mehkim TPE nastavkom so zasnovani tako, da sprejmejo in držijo izpušne odprtine, zasnovane tako, da se cev prilega znotraj ali zunaj, kot zahteva zasnova električnega orodja. od namestitve enega konca do drugega traja nekaj sekund in nudi gladko 360-stopinjsko vrtljivo povezavo, ki preprečuje zvijanje cevi ali omejevanje gibanja električnega orodja. Razširjeni komplet adapterjev vključuje 3/4 1 1-1/4 1-1/2 nastavke pokrova električnega orodja.

Batteries required	No
Brand	Cen-Tec Systems
Color	Black
Country of Origin	USA
Customer Reviews	4.5 4.5 out of 5 stars 2,758 ratings 4.5 out of 5 stars
Included Components	adapter set
Item Dimensions LxWxH	8 x 6 x 4 inches
Item model number	95237
Item Weight	15.5 ounces
Manufacturer	Cen-Tec Systems
Material	Thermoplastic Elastomer
Material	Thermoplastic Elastomer (TPE)
Product Dimensions	8 x 6 x 4 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z^*

Vaša ocena

Scritto da: Jeff D.

Works great, but if you use this for woodworking buy the antistatic one

I bought this to help me clean out home air ducts and for woodworking dust collection. I did an hour of sanding and the air around the hose is crackling with static electricity. I didn't get shocked, I was just surprised. It didn't seem unsafe, it was uncomfortable. This same brand sells antistatic versions of these hoses. The quick connection is compatible with my Bosch vacuum attachments. There isn't a rubber gasket on the hose end like my Bosch hose so it leaks more vacuum pressure but it works fine for my uses.

Scritto da: Linda

Nice quality

We really like this long hose however in order for it to fit the ends we had to order an extra piece from the company

Scritto da: 2 Logical

Works w/ Makita tracksaw and Rigid vacuum

I didn't include a pic of the hose attached to the tracksaw but other users have shown that. Without batteries Makita's XPS01z and Centec's 16' hose fit in the Makpac XL case with room for other typical small items for tracksaws. i.e. Bench dogs, a square + a couple clamps etc. However, if you can get by with 10' of hose that would make this much easier. The hose is nice and soft but does not like to twist(rotate) so it can whip around a bit when you spin your tools. Since the hose itself is light and supple this hasn't been a problem. So far it's doing its job.

Scritto da: Scotty Gregersen

Perfect fit for Bosch GCM miter saws

I am exceptionally pleased with how this fits up to my miter saw. It's like it was specifically made for it. AND it was cheaper than the Ridgid hose/adapter combo that I was going to use. I had bought multiple adapters and hoses from Home Depot and Lowes to try and find a dust collection solution for my miter saw. The hose side of the dust extractors on the Bosch GCM saws only allow male hose attachments due to the rivet tabs on the outside. I had come up with a couple solutions using an adapter and 2.5inch hose (too bulky and got in the way), or the Ridgid pro-grade 1-7/8" hose (just the slightest bit loose in the saw). I decided to come on Amazon and see if there were better adapters which would work with my 1-1/4" hose I already have. I came across this Cen-Tec hose with multiple adapters and figured I'd give it a try since it was cheaper than the Ridgid pro-grade. I wasn't expecting much, but when I pulled it out of the box and saw the blue ring which was similar to the one on the dust bag I got excited which quickly turned to elation when it fit perfect on the saw. The other end of the hose connects well enough to the duststopper. It will only go in as far as you can see in the photo, but it is tight and won't come out. Update: I tried the two adapters that came with the hose on all the tools I have with dust collection. The following is what the adapters work with, and what they don't. Also, I included measurements of the adapters. Adapter 1: I.D. ≈25.5mm / O.D. ≈35.5mm at end tapers up to ≈ 37mm; ≈ 40mm at raised rib. (see photos) Adapter 2: I.D. ≈ 38mm / O.D. ≈ 48.5mm Tools that at least one of the adapters will work with: Dewalt DWE6423 sander (most likely all Dewalt palm sanders) Dewalt DW6182 plunger router base for the DW618 router. Ridgid random orbit sander Model# R8606B Ridgid palm router Model# R860443B Makita SP6000J plunge saw Tools that these adapters won't work with: Ridgid belt sander Model# R86065B Rigid Jig Saw Model# R8832B Dewalt DWS779 Miter saw (the smaller adapter can be forced in, but only a small portion will fit. You would need to tape it to prevent it from falling out)

Scritto da: CrazyGeorge

Fit exactly as described

Fit exactly as described on Bosch miter saw

Scritto da: Michael C.

Great hose, almost great adapters

The hose itself is great. It looks nice, it is sturdy, and has a nice quick-disconnect clip end. The shop-vac end fit just fine. Neither adapter fit either of my palm sanders, though, which have 35mm exhaust pipes. I should have measured, instead of assuming "industry standard" would work for me. The adapters are also a little bit long and straight, which can be awkward hanging off the back of a sander. (especially if duct-taped to the end of the pipe on the tool) The upside is that the adapters swivel and latch on the hose, so the hose won't pop off, and won't coil up as hand-held tools move around. I 3D printed my own adapters, which turned out really nice. Creating a mating clip-end for the hose is really easy. Open your favorite CAD software, draw a cylinder with diameter 50.5mm and height 28mm, then cut out a cylinder 45.5mm dia / 26mm high, then cut out a horizontal oval cylinder 8.2mm from the opening with dimensions 5.6mm x 10.9mm. (the clips fall into these, to latch) For bonus points, cut the ovals further back for better finger access to release the clip. Then cut a hole 28mm dia in the back wall (air passage) and model the rest of the part that connects to your tool.

Scritto da: Woodhead

You need it, I sure did! Save your lungs from all the fine dust you make.

I really liked that the hose does not shorten-up when the suction end is blocked! I have another (Rockler) stretchable dust hose that trys to shrink way up when the nozzle is blocked (even if only for a moment) - it pulls the tool out of position and knocks anything in its way over. This does not shrink or whip around. On the other hand, since this hose does not shrink-up, it takes more space to store (well worth it for me). The quick detach ends work well, making it easy to switch from tool to tool - if you leave the rubber adapter ends on your tools. I also bought the optional set of more rubber adapter ends - this gives me all the sizes I need for all my tools. I’m really glad I bought it! I used it on my belt sander, 3 orbital Sanders, a drill press and a track saw. I would like to find some plain nozzles for general cleanup too

Scritto da: Brad

A little cheap but it works

It's a little cheap in build but it works fine.

Scritto da: Don or Betty

Vacuum hose

Well built vacuum hose, works perfect on my hand sander

Scritto da: Robin

Great Suction

I was surprised to find that upgrading my hose made such a difference in the functionality of my shop vac. This is a great hose. Like other reviewers, the fittings don't fit all of the tools in my shop but that is to be expected with every brand having their own proprietary fittings. I am very pleased with this purchase. And I would buy it again.

Scritto da: spinedr

Flexible material

Love the flexibility when cleaning my 20 foot dryer vent.

Scritto da: Amazon Customer

Streamlined dust extraction and cleaning

I'm the type to avoid setting up the shop vac because I don't want to put the effort in. Bought a couple sets of these so all my tools are 1 click to set up, and my 30-foot vacuum hose is now 1x 10 and 1x 20 feet so I'm not wrestling with coiling and uncoiling it all the time. Swivel action is a lifesaver here!!

Scritto da: Ryan

Required some modifications

I bought this to connect my existing ridgid vac setup to my new makita track saw. One of the included connectors fit the saw just fine but the included vacuum hose end did not fit the ridgid hose at all and all the connectors are useless without it. In the end I tried pulling just the runner piece off the connector that fit the saw, and the other end just happened to fit my existing hose end. I was going to initiate a return but it worked out in the end.