Ingersoll Rand 4151 6” orbitalni pnevmatski brusilnik, pripravljen na vakuum, nizke vibracije, brez vrtenja, brez prahu, 12.000 vrt/min, 1,92 lbs, zamenljivi ročaji, ena velikost 4151 Vakuumski pnevmatski brusilnik brusilnik

Name: Ingersoll Rand 4151 6” orbitalni pnevmatski brusilnik, pripravljen na vakuum, nizke vibracije, brez vrtenja, brez prahu, 12.000 vrt/min, 1,92 lbs, zamenljivi ročaji, ena velikost 4151 Vakuumski pnevmatski brusilnik brusilnik
Brand: Ingersoll Rand
SKU: 814227015828
Price: 197.51 EUR
Availability: InStock

Brand:Ingersoll Rand

3.8/5

€
197.51

OPIS IZDELKA Zračni orbitalni brusilnik Ingersoll Rand 4151 nudi udobje uporabnika z ergonomsko obliko dlani in zmanjšanimi vibracijami. Primeren je tako za vertikalne kot horizontalne aplikacije. Uporabite na površinah, kot so les, steklena vlakna, pločevina in aluminij. Izdeluje izjemno kakovosten zaključek in se povezuje s centralnimi ali prenosnimi vakuumskimi sistemi. Brusilnik 4151 ponuja zanesljivo in enakomerno izvedbo, ki povečuje učinkovitost in hkrati pomaga ustvarjati vrhunske zaključke, ne glede na to, ali poravnate zgornjo površino lesene mize ali odstranite barvo s kosa kovine. 6-palčna vakuumska brusilna plošča ima edinstveno zasnovo in velike luknje s premerom 1/2-palca za učinkovito delovanje – skoraj ves prah se takoj odvede stran od dela, kar poveča vidljivost in izboljša splošno kakovost. Dodatne funkcije vključujejo motor z 12.000 vrtljaji na minuto s 3/16-palčno orbito za zaključek brez vrtinčenja in vzdržljivo, a lahko kompozitno zasnovo, ki tehta manj kot 2 funta. Ta model brusilnika ima omejeno 1-letno garancijo. AMAZON.COM Ingersoll Rand 4151 ultrazmogljiv, 6-palčni, na vakuum pripravljen pnevmatski pnevmatski brusilnik z naključno orbito je model z nizkimi vibracijami, ki proizvaja ultra visokokakovosten zaključek in se povezuje s centralnimi ali prenosnimi vakuumskimi sistemi. Brusilnik 4151 ponuja zanesljivo in enakomerno delovanje, ki povečuje učinkovitost in hkrati pomaga ustvarjati vrhunske zaključke, ne glede na to, ali poravnate zgornjo površino lesene mize ali odstranite barvo s kosa kovine. Naključni pnevmatski brusilnik 4151 Na kratko: * 6-palčna vakuumska brusilna plošča * Motor z 12.000 vrtljaji na minuto s 3/16-palčno orbito za končno obdelavo brez vrtinčenja * Trpežna, a lahka kompozitna zasnova tehta manj kot 2 funta * Mere: 8,2 palca x 4,7 palca x 6,8 palca Lastnosti pnevmatskega brusilnika Ingersoll Rand 4151, pripravljenega za vakuumiranje nizke vibracije, kar omogoča bolj gladko brušenje. Oglejte si večje lastnosti 4151, tako kot večina ekscentričnih brusilnikov, ima nihajočo brusilno ploščo, ki se prav tako vrti, tako da se vzorec brušenja razlikuje za enakomerno obrabo površine. Za razliko od večine orbitalnih brusilnikov pa 4151 izsesa prah in delce skozi in okoli blazine, ko je v uporabi, s čimer zadržuje tujke stran od motorja in pomaga zmanjšati število in resnost zamašitev. Vakuumska brusilna plošča ima edinstveno zasnovo in velike luknje s premerom 1/2-palca za učinkovito delovanje – skoraj ves prah se takoj odvede stran od dela, kar poveča vidljivost in izboljša splošno kakovost. O Ingersoll RandZ zgodovino, ki sega v leto 1871, Ingersoll Rand in njegova družina blagovnih znamk predstavljajo dokazano zgodovino v gradbeništvu, rudarstvu, industrijskih in komercialnih trgih. S pridobitvami, inovacijami in osredotočanjem na stranke današnji Ingersoll Rand ponuja vodilne rešitve in storitve na trgu, ki strankam omogočajo ustvarjanje napredka v različnih panogah in trgih, ki se dotikajo vsakdanjega življenja. Kaj je v BoxOne Ingersoll Rand 4151 ultra-duty, 6- palčni, na vakuum pripravljen pnevmatski pnevmatski brusilnik. Ingersoll Randov brusilnik 4151 ima motor z 12.000 vrt/min in 3/16-palčno orbito za obdelavo brez vrtinčenja. (Kliknite za povečavo) OD PROIZVAJALCA Ultra Duty Naključni orbitalni brusilnik, pripravljen za vakuumiranje. Poglej več

Znesek

Dodaj v voziček Kupi zdaj

EAN: 814227015828

kategorije Orodja in pripomočki za dom, Močno in ročno orodje, Močno orodje, brusilniki, Naključno- Orbitni brusilniki,

ZRAČNI POGON: Pnevmatski brusilnik ima 1/4-palčno odprtino za dovod zraka in porabo zraka 8 CFM. UDOBJE UPORABNIKA: Na voljo so zamenljivi obročki za prijemanje, ki ustrezajo velikosti roke operaterja; Lahka, a trpežna kompozitna zasnova tehta manj kot 2 lbs. GLADKA MOČ: motor z 12.000 vrtljaji na minuto s 3/16-palčno orbito zagotavlja končno obdelavo brez vrtinčenja; Nizka zmogljivost tresljajev omogoča bolj gladko brušenje. ODSTRANI PRAH PROČ: Za razliko od večine orbitalnih brusilnikov, 4151 odsesava prah in delce skozi in okoli blazine, ko je v uporabi, s čimer prepreči tujke stran od motorja, da zmanjša zamašitve. PRIPRAVLJEN ZA SESANJE: IR 4151 Ultra Duty rentomski pnevmatski brusilnik se poveže s centralnimi ali prenosnimi vakuumskimi sistemi; Ne glede na to, ali poravnate zgornji del lesene mize ali odstranite barvo s kovine, poveča učinkovitost in ustvari vrhunske zaključke.

Amperage Capacity	8 Amps
Amperage Capacity	‎8 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Ingersoll Rand
Brand	‎Ingersoll Rand
Color	‎Factory
Country of Origin	‎China
Customer Reviews	4.8 4.8 out of 5 stars 341 ratings 4.8 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Grit Number	‎80
Grit Type	Coarse
Grit Type	‎Coarse
Horsepower	‎0.2
Included Components	‎Ingersoll Rand - Sander Air 6In. Random Orbital 12000Rpm Vac Rdy
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	8.2 x 4.7 x 6.8 inches
Item Dimensions LxWxH	‎8.2 x 4.7 x 6.8 inches
Item model number	‎4151
Item Package Quantity	‎1
Item Weight	‎1.92 Pounds
Manufacturer	‎Ingersoll Rand
Material	‎Plastic
Maximum Rotational Speed	‎12000 RPM
Part Number	‎4151
Pattern	‎Sander
Power Source	Hand Powered
Power Source	‎Hand Powered
Product Dimensions	‎8.2 x 4.7 x 6.8 inches
Size	‎One Size
Special Features	‎lightweight
Style	‎4151 Vacuum Ready Random Orbit Pneumatic Sander
Warranty Description	‎1 year from date of purchase with sales receipt or invoice

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z^*

Vaša ocena

Scritto da: Douglas C Butcher

Sanding backer plate not included

Full disclosure, I have not used this sander yet for the job I purchased it for, which is wet-sanding the oxidized hull gelcoat on a new-to-me sailboat. I have other random orbit sanders, but needed a pneumatic sander to use for wet work. The "in-the-box" information on the product listing is unclear. The "sander" does come with a backing disk, but it appears to be intended for use with a wool buffing bonnet or something similar to that. Fortunately, I selected the choice that included a "6 inch velcro face sanding pad" for a few extra bucks. Note that if you want to use velcro sanding disks, you'll either need to by an adhesive hook-and-loop disk to stick on the included backer plate, or select the option that includes the additional sanding pad.

Scritto da: M. Spaulding

Good But Not Great Sander

I bought this model for use in woodworking because it has dust collection. I am a retired auto mechanic and have had great experience in the past with IR tools. This one somewhat disappoints me as there Is so much plastic. If you don't need the dust collection option I would consider one of the traditional DA sanders, although they are heavier they are also built better and will last. I also have an electric 5" RO sander (yellow) which is at least 10 years old and still works well. I like air tools, have a large compressor and thought this would be ideal for my situation. It is much quieter than the electric one but the dust collection doesn't work as well as the electric sander which has 8 holes and a larger vacuum port. Also it is not easy to find 6" PSA paper with 6 holes unless you buy 100 count packs of each grit you want. You can also buy a hook & loop pad for this sander though and H&L paper is readily available. I do like that it doesn't require oil like most pneumatic tools, it is light and does seem to have a lot of power. There are a lot of new features on this tool and I like it but just expected better quality from IR. If you are buying for woodworking like me the electric ones may be a better option. This tool needs 8cfm minimum with 12cfm needed under load. My compressor is capable of 19cfm but still runs nearly half the time I am sanding. I don't think that is very economical compared to a 3 amp electric model. Use in a body shop would be a totally different story, electric tools don't seem to last under that environment and this would be ideal considering it's light weight and auto shops always have large compressors running all day anyway. Mike

Scritto da: Christopher J.

Great peforming tool!

This sander was a birthday gift for my friend. He is a tool "junkie"; and, when I was last in his shop, I noticed that his sander was not performing properly. This circumstance was therefore the motivation for my order. In any event, my friend was very happy to get the sander. On the other hand, he had yet to receive the sanding discs which I had ordered at the same time. Quite frankly, the discs had not even shipped yet - a bit of a disappointment if you ask me. In any event, the very next day, he took the sander to the shop. He called me later to tell me how well the sander performed on some of the auto body projects he had going. He also mentioned that he had gotten so used to his poor performing sander that he'd forgotten what was meant by "optimal performance" for such a tool. The new sander brought back to him the proper perspective. In further clarifying his opinion, he mentioned that the sander was easy to operate, comfortable to hold, and made his projects go a lot faster. He also said that detail work was not too difficult despite the six inch discs. All in all, he was very happy with my selection.

Scritto da: dustin

Works great

Very good rpm plenty of torque. Absolutely great DA for body work and general fabrication needs

Scritto da: cz85b

aggressive sander!

Let me start by saying that I have never been really fond of aggressive sanders... I am a hutchins kind of guy who likes that nice smooth feel... HOWEVER, that nice smooth feeling sander that I love is not practical in all instances! For example, getting body work done quickly. I paint Helicopters, and we are ALWAYS under the gun. Most recently, we were told that the job we were supposed to have for 12 days was needed in 8, so we had to push extra hard. This sander can do no wrong with that! It works as well as the $250 snap-on, the National Detroit, the Dynabride, but if I was going to offer any kind of advice... The small body enables the sanding pad to get into some harder to reach places that other sanders won't be able to reach. IF you are not going to hook it up to a vacuum attachment, buy a cheap pad that you won't mind chewing up around screws and rivets! It is what I did, and I am glad that I did.. Someday I might be able to use this with a vacuum... (Hey, a man can dream, right???

Scritto da: Jesus

Workhorse

Great tool. Lightweight, comfortable and quiet, I use it on a daily basis in a custom restoration shop.

Scritto da: Shadow2000

Excellent DA Small Exception read review

Excellent power and very quiet and lite. Only issue as others have pointed out is the exhaust pipe as an attachment and is right next to the hose inlet and your hand and is easily knock off. And is some what in the way.

Scritto da: Michael Gonzales

Could have been 5 stars

It’s really smooth and low vibration and maintains its power and it’s quiet...the one thing I didn’t like was it’s impossible to take off the pad pad after installing it because it’s too close the the motor there’s no gap room to fit the tool that takes it off.

Scritto da: alanwebb

Rubbish

Maybe OK for polishing but absolutely rubbish for sanding no guts

Scritto da: Nova Scotia

Best sander

This is the most amazing sander, I love it. Used it lots but most recently I stripped and painted my F-350 super crew, I have a couple of other sanders but this one takes the work out of sanding.

Scritto da: Jean C.

fonctionne bien

fonctionne bien mais tourne pas aussi vite que j'aurais aimer, me semble manquer de force mais facile à utiliser, et efficace quand même

Scritto da: Dude from the PNW

Check the specs! 15.5 CFM, NOT 8 CFM.

Description is wrong. Returned as the item consumes 15.5 CFM under load, not 8 CFM. It uses a lot of air, and it won’t be useful if your air compressor can’t keep up. You’ll need a 5 hp compressor as a minimum.

Scritto da: Vince Legarte

Works Good, and quite..

I love this sander, good, quite, quality, equals perfect .. lol.