POWERTEC 20335 Quick Release Vertikalna preklopna objemka 12130-500 lb Držalna zmogljivost z gumijasto tlačno konico, 2PK preklopna objemka, 500 lbs, 2 PK

Brand:POWERTEC

3.6/5

44.42

predstavljamo Quick Release Vertical Toggle Clamp proizvajalca POWERTEC. Ta objemka je absolutno nujna za vsak sklop šablone, pritrditev orodja ali premično podlago. Ponaša se z navpično sprednjo montažo, ki omogoča nastavljiv in varen oprijem ter hitro sprostitev za številne vaše lesnoobdelovalne projekte, ki zahtevajo posebno proizvodno vpenjanje za vrtanje, varjenje ali rezkanje. Ne glede na to, ali ste profesionalec ali oseba, ki naredi sam, nekateri projekti zahtevajo, da s sponami ravnate v navpičnem položaju, ko je prostor težava ali vas motijo ​​vodoravne spone. Ta objemka vam ponuja učinkovito rešitev in vam omogoča, da se osredotočite na natančno in hitro opravljanje stvari. Nosilnost: 200 lbs Vrhunska zasnova Visokokakovostno jeklo in ročaj v barvi vinila omogočata preprosto, udobno in varno uporabo. Kljub svoji lahki zasnovi se preklopna objemka ponaša s težkimi lastnostmi, vključno s priročnim preklopnim mehanizmom, ki omogoča največji odmik, skupaj s podnožjem s prirobnico in oprijemom pod kotom 90 stopinj, ki vam omogoča največji nadzor. Njegova že tako vrhunska konstrukcija je izboljšana s pocinkano prevleko za odpornost proti koroziji in optimizirano vzdržljivost. Običajne uporabe Namizne žage Priključki in napeljave Žari za dimljenje Več

SPECIJALE SPONKE: 1-3/8” x 1-7/8
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Red Metallic
Color ‎Red Metallic
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 604 ratings 4.5 out of 5 stars
Included Components ‎Toggle Clamp
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 6 x 6 x 3 inches
Item model number ‎20335
Item Package Quantity ‎1
Item Weight ‎1.5 pounds
Manufacturer ‎POWERTEC
Material Carbon Steel
Material ‎Carbon Steel
Part Number ‎20335
Product Dimensions ‎6 x 6 x 3 inches
Size ‎500lbs, 2 PK
Style Toggle Clamp, 500lbs, 2 PK
Style ‎Toggle Clamp, 500lbs, 2 PK
Tensile Strength 500 Pounds

3.6

13 Review
5 Star
71
4 Star
16
3 Star
10
2 Star
2
1 Star
2

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z*

Scritto da: Laserboy
These are a bargain!
I welded these on my trailer drop legs to keep them from rattling when you drive down the road, they work great and are very secure.
Scritto da: Gregory Girard
Handy
Handy clamps for making woodworking jigs with. They work flawlessly. The holding power can be adjusted for the material your working with.
Scritto da: ANDRES MARULANDA
Excelent
Excelent
Scritto da: PeterSA
A Good Surface Clamp
The only reason this didn't get 5 stars is because the product description doesn't make it obvious that this is a SURFACE clamp. This is basically a surface clamp +- 1/4 inch. i.e without additional blocking, mounted on the same surface as the workpiece, the workpiece can be up to 1/4" thick, or the pad can be adjusted to clamp at 1/4 inch below the clamp surface level. Yes, you can clamp a 2" board, but only if you mount it on a 2" block. Just like you can clamp 6 ft block, if you mount it on a 6 ft block. That aside, it suited my purpose just fine for making a jig to cut large panels of OSB. I thought I would need both clamps to hold the jig securely against 8' panels, but just one suffices as it has great holding power.
Scritto da: Mark B.
easy to use, work well
I use these for wood working jigs for the table saw to hold the workpiece while cutting. These hold the workpiece securely while cutting the workpiece.
Scritto da: Amazon Customer
sturdy
good quality
Scritto da: Andrea Albergo
Great heavy duty. Would buy again
Use them on a rip guide from my table saw the vertical lock handle gave tight tolerances to the fence Just what I was looking for built well excellent quality better than ones that I have had before from another manufacturer
Scritto da: Katherine & Mick
Solid With Possible Limitations
As other reviews mentioned, these appear to be good quality and have a solid feel. The reason for the four stars and not five is that I am unable to clamp anything thicker than 1 x material - meaning 3/4 inch thick pieces of wood. It was unclear to me from the description what the capacity was. In the questions and answers section it was mentioned that the capacity is about 2 inches. After removing the bolt above the rubber stopper so the stopper was flush with the metal (see pic of product), I was able to gain more range and was able to barely clamp down an inch thick piece of wood. I was unable to clamp down 2 x material (1.5 inches thick). Maybe mine will loosen over time or there are variations in the manufacturing. I will most likely be using this to clamp down 1x boards so its not thay big of a deal but felt that a one star deduction was fair. Also, I am sure that I assembled it properly as pictured.
Scritto da: Raul
Second item defective
I bought this item two times.. The first one was OK, so I bought the second thinking that was the same as the first one, but...it was defective. The handle was unable to lock the arm because the arm wasn't at the right place. Instead of returning the item that I could have done, I fixed it lowering the base of the arm with a file. Powertec should have better quality control.
Scritto da: Anonimo
Supe reforzadas y fuertes
Me gustó mucho que está muy fuerte palanca está forrada de plástico duro no es una goma suave, eso ayuda a que puedas tomarla con firmeza, son muy fuertes y resistentes, la recomiendo ampliamente.
Scritto da: Jean-Claude Lecours
Serre moi.
Bonjour,ces serres me serve a retenir ma piece de bois dans mon patron a profiler sur la table a toupie.Merci,jean-claude.
Scritto da: Cliente de Amazon
Un accesorio muy útil en el taller
Es muy útil para fijar piezas de madera qué se van a maquinar con alguna herramienta.
Scritto da: Dot Wilson
Good Clamps
Good strong claps.

Podobni izdelki

Odkrijte našo mednarodno mrežo

Pošiljamo v 28 držav, več kot 200.000 izdelkov. Bodite na tekočem, naročite se na glasilo.

Array