0
0

Skupaj:€ 0.00

Glej vozičekPreveri
LoginRegister
0

Skupaj:€ 0.00

Glej vozičekPreveri
LoginRegister

VEVOR Stroj za izdelovanje gumbov, več velikosti 1+2,25-palčnega kompleta za stiskanje značk, izdelovalec žebljičkov za darila za otroke DIY, potrebščine za izdelovanje gumbov s 500 kosi delov gumbov, krožni rezalnik in čarobna knjiga

Brand:VEVOR

3/5

€
265.93

Naše moške kavbojke, brezčasne s pridihom ostrega urbanega pridiha, so oblikovane za videz in udobje, ne glede na to, ali jih nosite za ležeren dan v službi ali za večerni izhod. Te hlače ozkega kroja so sodobno lepega videza in jih lahko oblečete z gumbom navzgor ali združite z majico, da ustrezajo vsaki priložnosti. Te ozke kavbojke so zelo udobne in imajo zadrgo, zapiranje na gumbe in pas - zanko v pasu. Konstrukcija s 5 žepi pušča dovolj prostora za vaš telefon in ključe, srednje visok pas pa meri 10 3/4 in se ujema z ozkim krojem za zožen profil. Te moške raztegljive kavbojke so opremljene z našim vrhunskim džinsom, zato zagotavljajo dovolj prilagodljivosti za udobno premikanje. Te moške ozke kavbojke nudijo privlačen dizajn s sproščenim, ponošenim videzom. Naše ožje hlače za moške so narejene iz mešanice bombaža in elastana za raztegljivost in udobje, zato jih je mogoče prati v pralnem stroju pri nežnem ciklu. Hudson Jeans ponuja slog, ki je nespoštljiv, lahkoten in preprosto kul. Nudimo vam kakovostna oblačila, v katerih boste videti in se počutili najboljše. Smo več kot blagovna znamka jeansa. Denim je naše platno.

Ni enot na voljo

EAN: 0840281565658

kategorije umetnost, Obrt in šivanje, Šivanje, Sešitni pribor in pribor, Zavezniki, Pogoni,

Posebno darilo: komplet stroja za izdelavo žebljičkov je odlično darilo za vaše otroke/ženo/mamo/prijatelje. Ta stroj za stiskanje žebljičkov za značke lahko uporabite za izdelavo različnih čudovitih značk. Uživajte v trajnem snemanju turističnih znamenitosti, hrane, hišnih ljubljenčkov, praznikov, obletnic itd. Odličen je tudi za gumbe z žebljički, vezice za vrvi, obeske za ključe, odpirače za steklenice itd. Enostaven za uporabo: Uporabniški priročnik vsebuje podrobna navodila za uporabo, ki pojasnjujejo, kako namestiti kalupe in izdelovanje značk. Postopek delovanja je preprost. Verjemite nam, hitro se ga boste naučili! Zaradi zvočne strukture bo vaše potovanje za izdelavo značk varnejše in udobnejše. Pripravite se na začetek ustvarjanja!. Izdelan iz visokokakovostnih materialov: stroj za izdelavo žebljičkov je izdelan iz visokokakovostne aluminijeve zlitine, površina pa je prevlečena z novim materialom ABS. Je trden in odporen na zlome. Trdna spodnja plošča in kovinska tirnica za nadgradnjo lahko zagotovita dolgo življenjsko dobo. Ojačan vzmetni kalup poveča stopnjo uspešnosti izdelave značk. Obsežen komplet, pripravljen za uporabo: 1 x stroj za zatiče, 1 x 25 mm kalup za gumbe, 1 x 58 mm kalup za gumbe, 2 x okrogla rezila za papir, 300 kosov x 25 mm in 200 kosov x 58 mm pripomočkov za značke za zatiče, 2 x šestroba ključa, 2 x podložki , 1x priročnik. Poleg tega boste prejeli edinstveno “Mr. Panda Magic Book” z veliko ljubkimi vzorci pand. Stroj za izdelovanje gumbov 2 v 1: Za vas smo pripravili nadgradnjo stroja za izdelovanje gumbov vse v enem. Priloženi so 2 velikosti kalupov: 25 mm (1 palec) in 58 mm (2,25 palca). Njegova popolnoma nova snemljiva zasnova vam omogoča tudi zamenjavo drugih velikosti kalupov, s čimer lahko v hipu izdelate različne značke za gumbe.
Batteries required No
Brand VEVOR
Color Black
Country of Origin China
Customer Reviews 4.0 4.0 out of 5 stars 47 ratings 4.0 out of 5 stars
Item model number 1+2.25 Inch Badge Punch Press Kit
Item Weight 21.8 pounds
Manufacturer VEVOR
Material Paper
Number of pieces 500
Product Dimensions 7.9 x 3.7 x 19.7 inches
Shape Circle,Hexagon
Size 1+2.25 Inch
Warranty Description 90 days

3

9 Review
5 Star
63
4 Star
9
3 Star
8
2 Star
4
1 Star
15

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z*

Scritto da: Bill
Works great! Nice to have size options.
Good working button maker, but check your box. Mine came with a missing screw. Not a big deal, as it still works, I just have to go to the hardware store & get one. Funny thing is the right side screw is there so at least I have a reference for head size & thread pitch. If it came complete with the screw I would give it 5 stars.
Scritto da: Sherri H.
Easy and efficient
This thing is awesome! I’ve only used the smaller button size so far. There were a handful of wasted buttons but I was expecting that to happen until I got the hang of it. I discovered that if you do the second press too slow, that’s when part of the button wouldn’t seal fully. A quick, steady press does the trick!
Scritto da: sharee lynn smathers
Could be better
Product was easy to understand and worked well. The downfall came from the quality of materials the machine was made of. I set it about a foot away from my cooling down heat press and the plastic started melting!! Unfortunately I didn’t realize until too late and now there’s melted plastic all over the side of the machine. So. Would purchase again, wish the material quality was better.
Scritto da: Winter G
Great Buy
So far everything has worked perfectly on the product!
Scritto da: Krista Somers
Great Button Maker / Missing Items / Terrible Customer Service
I first need to state that this is a great button maker. It's well made, easy to use and very sturdy. I'm giving it a low rating for the reason that follows.... After a few days of testing and making several of the larger sized buttons, we switched over to the smaller size and discovered that the transparent protective films for the 25MM were missing from the box. The two options through Amazon were 1) return the whole item, or 2) contact the manufacturer. Since we already used quite a few of the supplies for the larger buttons, and it was only a small pouch of films that were missing, I decided to contacted Vevor. I worked with their customer service department via chat/email. They verified my order with Amazon and offered two options; 1) The would send the missing items from their supplier overseas with an estimated 2 - 3 weeks delivery time, or 2) Return the whole thing to Amazon. As I mentioned above, I did not think that a total refund/replacement was necessary since the missing items were so small, so confirmed that I would wait for the missing films. 3 weeks later, still no replacement, but I did get an auto-generated email from Vevor stating that since they never heard from me, they would assume that the issue has been resolved and would be closing the ticket in 24 hours. I contacted them immediately and re-explained the whole ordeal. They responded with "I'm sorry that we can't contact the technical staff to reissue the accessories for you, please contact Amazon as soon as possible to refund you." So, now I'm back to square 1. I still don't feel right about returning an item that 1) I like, and 2) I have already used so much of the supplies. But I also don't think it's right that they will not work with me to find a solution. I've found that if I were to purchase the missing items, through amazon, it would run me $25+, so it looks like I have no choice but to send the whole thing back. WHAT A PAIN! And a total waste of resources.
Scritto da: Sandra
Perfect Pin-Back Button Machine!
I've been wanting a button press machine for a while now and finally decided to go with this one because of the two different sizes and because it's black!! The press itself was pretty easy to assemble, it's made of hard plastic and metal and pretty sturdy. The four pictured buttons were the first buttons I made and they came out perfect - no problems in neither the metal backings nor the plastic backings (one thing though, when doing the bigger metal backings (2.25in), you have to put one of the green washers provided in the right lower mold, otherwise the top die won't be able to grip the metal backing correctly. This is ONLY for the 2.25" metal backing (the 1.25" metal backing will be fine without the washer). Also, your picture must be the same size as the mylar and not 1.25/2.25!! I make 1.75" and 2.75" circles in Photoshop and just place the image there, print them then use the circle cutter provided in the package, I adjust the blade then cut them out. I've only used the 2.25" circle cutter though, I've had problems with the smaller circle cutter so I don't really use it... instead I use scissors to cut out those smaller ones, but it's a little time consuming so I'll probably cut those in my Cameo. For the paper, I've used regular printer paper (28lbs) and cardstock (80lbs) with no problems. The top dies are easy to change between 1.25 and 2.25 - no problems there so far. The manual pretty much explains everything really well in steps, so you'll have no problems. Overall, it's a really nice button machine, I really do recommend it! So far I've made about 50 buttons in both sizes, I have had a few come out wrong due to a wobbly table (this is why it's important to have the press on a firm/stable table otherwise the buttons will come out wrong), but other than those all of them have come out perfect! (Update 1) to add photos of the buttons since I forgot to add them last time. Also, I was finally able to use the 1.25" circle cutter with no problem after switching the blade rotation to cut counter-clockwise (same as the 2.25" circle cutter) and I haven't had any problems cutting with them since. I've read many reviews saying they don't work, but they do for me! You just have to get the hang of it and you'll have zero problems cutting perfect round circles ????. (Update 2) I've made over 200+ by now and still going strong! I'm not going to lie, there are a few that don't come out right at times, but it's rarely when that happens and it'll usually be because I'm either not placing the items correctly or I'm not pressing down correctly/doing it too quickly....For all those reviews saying it doesn't work, you guys just don't know how to use it period lol.
Scritto da: Dylan osvold
Doesn't work and bad customer support
My device hasn't worked 1 time yet even after all the "fixs" they told me and I've spent hours on this thing making video and pictures so they can make me try to fix it don't buy this brand button maker it's a nightmare
Scritto da: michele calton
Think before you buy
plastic backs don’t work with the machine they fall apart. It’s a big waste of money.
Scritto da: Bernadette M.
SO MUCH FUN!!!
I love this product! How did I not buy this sooner. It is so easy to make a button. I am not sure if it can make 1000 buttons, as it says it comes with 1000 pieces. So just guessing here at least 300 buttons bc it takes 3 pieces to make a button. But anyway I am just having so much fun right now. Buttons for everyone!!!!

Podobni izdelki

hot
Bluza Dritz, beli biser, 11 mm, 20 kosov srajčnih gumbov, št.
0.1/5

€ 23.42

Bluza Dritz, beli biser, 11 mm, 20 kosov srajčnih gumbov, št.
0.1/5

€ 23.42

hot
Motiv Saro Rayon
2.3/5

€ 22.20

Motiv Saro Rayon
2.3/5

€ 22.20

hot
Blumenthal Lansing Favorite Findings Buttons, Feets, 12/Pkg, Valentines Hearts
3.5/5

€ 26.36

Blumenthal Lansing Favorite Findings Buttons, Feets, 12/Pkg, Valentines Hearts
3.5/5

€ 26.36

hot
SINGER 00725 Neprišiti takojšnji nadomestki za gumbe, 8 kosov, beli
2.3/5

€ 28.39

SINGER 00725 Neprišiti takojšnji nadomestki za gumbe, 8 kosov, beli
2.3/5

€ 28.39

hot
Gumb WR Pritisnite za ponovno polnjenje LRG
3.7/5

€ 70.18

Gumb WR Pritisnite za ponovno polnjenje LRG
3.7/5

€ 70.18

hot
Blumenthal Lansing Company Buttons Navtično sidro 18 kosov
3.7/5

€ 26.98

Blumenthal Lansing Company Buttons Navtično sidro 18 kosov
3.7/5

€ 26.98

hot
DRESS IT UP GUMBI Paket 12 paketov za jesen in noč čarovnic
3.5/5

€ 46.36

DRESS IT UP GUMBI Paket 12 paketov za jesen in noč čarovnic
3.5/5

€ 46.36

hot
Dress It Up JBT-3501 Gumbi 3501 Carrot Crop, večbarvni
3.6/5

€ 29.10

Dress It Up JBT-3501 Gumbi 3501 Carrot Crop, večbarvni
3.6/5

€ 29.10

Odkrijte našo mednarodno mrežo

Pošiljamo v 28 držav, več kot 200.000 izdelkov. Bodite na tekočem, naročite se na glasilo.

Array

Skupaj:€ 0.00

Glej vozičekPreveri

kategorije

Vse kategorije
meni kategorije blizu Voziček

Menu