0
0

Skupaj:€ 0.00

Glej vozičekPreveri
LoginRegister
0

Skupaj:€ 0.00

Glej vozičekPreveri
LoginRegister

Yost Vises Kombinirani primež 455

Brand:Yost Vises

3.8/5

€
241.20

Ta uporabna kombinacija cevi in ​​namiznega primeža ima 360-stopinjsko vrtljivo podlago in se pritrdi tudi na delovno mizo. 360-stopinjsko vrtljivo podnožje ima 2 zaklepa. Z ročnim zategovanjem zaklepnega gumba na podnožju zagotovite njegov položaj. Yost Vises proizvaja visokokakovostne primeže in dodatke za primeže že od leta 1908. Naše izdelke dobavljamo tako velikim distributerjem kot posameznim obrtnikom po vsem svetu, od primežev industrijskega razreda, primežev profesionalnega razreda, primežev za delavnice, lahkih do težkih. delovni primeži, večfunkcijski primeži, varilni primeži itd. Naši izdelki dosegajo ali presegajo industrijski standard zvezne specifikacije GGG-V-410A in potrošnikom zagotavljajo kakovostne izdelke, ki trajajo več let, po ugodni ceni.

Znesek
Dodaj v vozičekKupi zdaj

EAN: 797734008333

kategorije Orodja in pripomočki za dom, Industrijska in znanstvena industrija, Močno in ročno orodje, Delovno orodje, Ročne orodje, Vise, oblikovalci za mizo,

GARANCIJA: Na voljo z 1-letno omejeno garancijo in 90-dnevnim vračilom. VARNOSTNE INFORMACIJE: Nepravilna uporaba primežev lahko povzroči resne poškodbe oči, rok ali drugih delov telesa. Primeži morajo biti pravilno nastavljeni in uporabljeni. Pred namestitvijo in uporabo preberite, razumejte in upoštevajte vsa navodila, navedena v priročniku. KAKOVOST YOST VISES: Vsako orodje Yost Vises je zasnovano tako, da ima visoke standarde kakovosti, moči in vzdržljivosti. Kakovost cenimo pred količino in izdelujemo izdelke, ki so varni in enostavni za uporabo. Za zagotavljanje kakovosti nudimo doživljenjsko tehnično podporo. UPORABA: Prepričajte se, da je primež varno pritrjen na delovno mizo in da je ključavnica vrtljivega podnožja varna. Odprite primež tako, da zavrtite ročico primeža v nasprotni smeri urinega kazalca. Postavite predmet med nazobčane čeljusti. Zaprite primež tako, da ročaj obračate v smeri urinega kazalca, dokler se predmet tesno ne prilega v nazobčane čeljusti, in nadaljujte z zategovanjem, dokler ga ne morete več premikati. Ne zategnite preveč, saj lahko poškodujete predmet in/ali primež. Ko končate z delom na predmetu, zavrtite ročaj vijaka v nasprotni smeri urinega kazalca, da sprostite predmet. VRTLJIV PODNOŽJE: 360-stopinjsko vrtljivo podnožje z 2 zaklepoma. TEHNIČNE SPECIFIKACIJE: širina čeljusti 5,5 (12,7 cm), odprtina čeljusti 5 (12,7 cm), globina grla 3,25 (9,525 cm), najmanjša zmogljivost cevi 0,125 (0,3175 cm), največja zmogljivost cevi 2,5 (6,35 cm). KOMBINIRANI VEZI: 5,5-palčni kombinirani cevni in namizni primež Yost Vises 455 je narejen iz 30.000 PSI litega sivega železa z jekleno U-kanalo. Opremljen z veliko delovno površino nakovala, ima tudi zamenljive nazobčane zgornje čeljusti iz kaljenega jekla in trajno nazobčano cevno čeljust velike zmogljivosti.
Brand Yost Vises
Color Blue
Country of Origin China
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 14 x 7 x 9 inches
Item model number 455
Item Weight 11.36 Kilograms
Manufacturer Yost Tools
Material Cast Iron with Steel U Channel Bar
Product Dimensions 14 x 7 x 9 inches; 25.05 Pounds
Style Modern

3.8

13 Review
5 Star
80
4 Star
14
3 Star
4
2 Star
0
1 Star
2

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z*

Scritto da: Doug Wade
Very nice vise. A lot more sturdy than I thought it would be
Shipped as advertised. Will last for years. The plastic pieces to fit on the jaws was not in my box.
Scritto da: Mike
Solid, sturdy, and smooth operation. Great vise.
I love this vise. I got the 5.5" one as an upgrade from my previous one which was often too small, or would slip on my workbench. My previous one was the kind that tightens itself on the the workbench but doesn't bolt in. The Yost 455 is the perfect size for my projects and allows me to bolt it down so it's easy to use. Let me share the bolts, washers, and locking nuts you will want to use for mounting this. There is some conflicting information in the Q&A and reviews. If you have a workbench where you can drill through the top, I can say definitively that the best way to mount it is use the base as a template and mark where the holes are in the base. Then use a 1/2" drill bit to drill holes through the tabletop. I used the following hardware which should work for anyone. You'll just need to adjust the bolt length for the width of your tabletop. Bolts: 1/2 in.-13 x 2-1/2 in. Hex Bolt (2.5" was the right length for my tabletop, you made need shorter or longer) Washers: 1/2 in flat washers with a 1 in outer diameter (OD) (1/2" inner diameter) Locking nuts: 1/2 in.-13 Nylon Lock Nut All the mounting hardware set me back about $11 at the local orange colored hardware store. It would have been nice if the hardware was included, but the vise itself is a great value regardless.
Scritto da: John Farrington
Solid and well made.
This is a solid and well made vise. Smooth, easy operation. This should last for years.
Scritto da: Tony
Good Value
I bought this blue Yost 455 Vise about 1 year ago and I am very happy with it. Most of my work is light duty, so I mounted it on a wooden work bench with a 2 x4 frame. For my light duty needs, I used 1/2" hex bolts to minimize 2 x 4 wall thickness loss. I then bought the RUITOOL brand blue colored 5.5" Vise Jaws Nylon Vise Block with Magnetic Soft Jaws, and I'm very happy with these soft jaws too. The Yost 455 and these soft jaws are an excellent match for my bench needs. If using a 2 x 4 frame for vise fastening, think about using a drill press or portable drill guide so that the drilled holes are straight. .
Scritto da: BaronR
No need to spend more
Very sturdy and good features.
Scritto da: Jeff
Vise has all the features of a bench vise.
Fit and function are good, it only weighs about 35 lbs, which means for a 5.5” vise its a bit light. Weight equates to sturdyness when looking at vises. It will work well for my needs.
Scritto da: Mattamuskeet
Poor QC
I tried buying a vise local first at Harbor Freight (HF), but returned due to poor casting and I wasn’t impressed by Home Depot’s offerings. I ordered the Yost 455 after a lot of research. Out of the box, this thing is not the best quality. The jaws do not line up and there is a lot of slop when the jaw is open. It also came with a nick in the metal from the manufacturer. Like the 5” “Central Forge” HF vise, this one is made in China, but at least the jaws lined up with no slop on the HF and it was only $60 compared to $85. Still this one is better in comparison and a decent value. I just wish they still made quality items in the US at a reasonable price because nothing I have bought from China has been what I would describe as 5 star quality.
Scritto da: William A McHale Jr
Great value!
I swore off buying any more garbage from harbor freight and figured that meant paying a lot of money for items like this. Yost company is from MI, USA. I couldn't figure out for sure where this is made but I don't care because I installed and used it today and am extremely happy with it. Build quality, fit and finish look great. Super value.
Scritto da: BL
Awesome tool
This seems to be of great quality for the price. Others I searched for were either too expensive or looked to be of cheap quality. Shown is a picture of it bolted to my workbench. For it's size it can open fairly large and the pipe jaw area is very handy to have as well. Also love the rubber gromets permanently attached to the handle. Rotating function is very useful and locks securely into position.
Scritto da: Aaron D
Great For Light Duty Home Use
Great for light to medium duty. Have this in my garage on a makeshift work bench I made out of an old table that was going to be thrown out. Bolted to table fairly easy with 4 carriage bolts, nuts and washers. Jaws open and close smoothly and hold whatever I am working on very well.
Scritto da: Simon
Good bang for the$
Good quality for the price and company as been around for a while. No it’s not a top brand but it’s a really good starting point that will last you years.
Scritto da: Harywood
A Nice Vice for a Good Price
My son wanted a vice for Christmas. I did some research and aside from the expensive Record vises, the Yost provides good features and performance at an affordable price. He's really happy with it.
Scritto da: Paul
Hapy with my Yost vise
I am very pleased with my Yost vise. Build-quality and precision seem to be very good, and the price was very competitive.

Podobni izdelki

hot
Večnamenski namizni primež Wilton 650P, širina čeljusti 6-1/2, odprtina čeljusti 6-1/4 (28845)
3.2/5

€ 891.25

Večnamenski namizni primež Wilton 650P, širina čeljusti 6-1/2, odprtina čeljusti 6-1/4 (28845)
3.2/5

€ 891.25

hot
BESSEY BV-CO30 Clamp Base Primež
2.9/5

€ 75.72

BESSEY BV-CO30 Clamp Base Primež
2.9/5

€ 75.72

hot
VERTEX 3900-2220 samocentrirni CNC primež, 2
0.1/5

€ 2427.44

VERTEX 3900-2220 samocentrirni CNC primež, 2
0.1/5

€ 2427.44

hot
Yost Vises Vijak za primež Y18SS
3.7/5

€ 118.31

Yost Vises Vijak za primež Y18SS
3.7/5

€ 118.31

hot
Wilton TLT/SP-75, 3-osni rezkalni primež, 3 širine čeljusti, 1-5/16 globine čeljusti (11701)
1.2/5

€ 1033.99

Wilton TLT/SP-75, 3-osni rezkalni primež, 3 širine čeljusti, 1-5/16 globine čeljusti (11701)
1.2/5

€ 1033.99

hot
Visokovidni namizni primež Wilton 1560, 6 širina čeljusti, največja odprtina čeljusti 5-3/4 (63188)
4.1/5

€ 1195.81

Visokovidni namizni primež Wilton 1560, 6 širina čeljusti, največja odprtina čeljusti 5-3/4 (63188)
4.1/5

€ 1195.81

hot
Nagibni primež WEN, 3,25-palčni za namizne plošče in vrtalne stiskalnice (TV433)
4.1/5

€ 145.10

Nagibni primež WEN, 3,25-palčni za namizne plošče in vrtalne stiskalnice (TV433)
4.1/5

€ 145.10

hot
Woodstock D4093 4-palčni večnamenski primež 4
3.3/5

€ 235.06

Woodstock D4093 4-palčni večnamenski primež 4
3.3/5

€ 235.06

Odkrijte našo mednarodno mrežo

Pošiljamo v 28 držav, več kot 200.000 izdelkov. Bodite na tekočem, naročite se na glasilo.

Array

Skupaj:€ 0.00

Glej vozičekPreveri

kategorije

Vse kategorije
meni kategorije blizu Voziček

Menu