Bakrena ključavnica Comstar, spajkanje brez toplote za bakrene in medeninaste cevi V trenutku ustvari trajno tesno vez, zasnovano za ameriški vesoljski program in ustreza ameriškim vojaškim specifikacijam. Izdelano v ZDA 2 oz. 10-800 rdeča

Name: Bakrena ključavnica Comstar, spajkanje brez toplote za bakrene in medeninaste cevi V trenutku ustvari trajno tesno vez, zasnovano za ameriški vesoljski program in ustreza ameriškim vojaškim specifikacijam. Izdelano v ZDA 2 oz. 10-800 rdeča
Brand: Comstar
SKU: 0024924108000
Price: 55.50 EUR
Availability: InStock

Brand:Comstar

3.2/5

€
55.50

ComStar's Copper Lock je revolucionarna in okolju varna metoda za spajkanje cevi, zasnovana za ameriški vesoljski program. Ta edinstven izdelek takoj zlepi bakrene in medeninaste cevi/fitinge brez uporabe toplote ali kovinskega spajkanja. Copper Lock je odličen za vse rumene kovine, baker, medeninaste cevi, fitinge, vsa hladilna sredstva in tekočine. Preprosto ga nanesite v konektor in/ali na cev; Prepričajte se, da je tekočina v celoti po obodu, se prilega v cev in v 60 sekundah bo prevladalo trajno neprepustno tesnilo. Za ustvarjanje trajne neprepustne vezi ni potrebna toplota ali spajkanje. Copper Lock lahko zatesni bakrene cevi do 2 palca (580 mm). Eden od teh opisov 2 oz še vedno povezuje kar 340 3/8-palčnih nastavkov. Formula Copper Lock, ki je v postopku patentiranja, mu omogoča, da prenese pritiske 10.000 PSI pretoka in 500 PSI zaprtega. Prav tako lahko prenese temperature od -60°F do +300°F. Preizkuse tlaka vodnih sistemov lahko izvede v 2 minutah in preskuse tlaka sistema A/C v 25 minutah. Bakreno ključavnico je mogoče razstaviti tudi pri 400 °F vročini in jo nato ponovno uporabiti. Bakrena ključavnica presega vse ameriške vojaške specifikacije za bakreno lepljenje: Mil-S-46163A tip I, razred K, Mil-S-224723E črkovni razred CVV.

Znesek

Dodaj v voziček Kupi zdaj

EAN: 0024924108000

kategorije Orodja in pripomočki za dom, Industrijska in znanstvena industrija, varjenje in spajkanje, Oblika za spajkanje in spajkanje, Potopila in fluks, Solder,

Ne potrebuje toplote ali spajkanja za ustvarjanje trajne neprepustne vezi in ga je mogoče razstaviti pri 400 °F toplote in nato ponovno uporabiti. Bakrena ključavnica pomaga pri testiranju tlaka v vodnih sistemih v 2 minutah in v klimatskih sistemih v 25 minutah. Odlično za vsa hladilna sredstva z rumenimi kovinami, bakrom, medeninastimi nastavki za cevi in jih takoj poveže. Trajna tesnilna vez z oceno do 500 psi s temperaturnim območjem od -60 °F do + 300 °F. Okolju varna metoda za spajkanje cevi do 2 palca (580 mm).

Country of Origin	USA
Is Discontinued By Manufacturer	No
Item model number	10-800
Manufacturer	Comstar
Product Dimensions	5 x 4 x 4 inches; 3.53 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z^*

Vaša ocena

Scritto da: True Kong

Good product

Works realy well. Will buy again.

Scritto da: Michael Leahey

Impressed

Used this to extend a copper pipe in a bathroom reno! Was surprised how easy it makes it to do so.

Scritto da: b.right

Didn't work on ac tubing

Reviews looked great and I really wanted this to work, but sadly it failed on multiple connections on my mini split ac install. Maybe the pressures were to high or the tubing (1/2 and 3/8) ware too small. Nevertheless I had to replace them with flange nut connections. Maybe would have worked better with standsrd 1/2 inch water lines.

Scritto da: Joe

Works half the time!

I followed all the instructions, and cleaned the copper well (just as if soldering) and clean any dust left from the brush (tip from another reviewer). I had about a 50% success rate, the fittings didn’t blow off just had slight leaks. I bought the product for some spotshard to get to with the torch…had to do it the old and more reliable way in the end. ????

Scritto da: wezat

Magic

This thing works as advertised no question asked I told my friends about it forget about welding torch,

Scritto da: molehillrock

Works well and fast

It works just like a product that I have been used for the past 35 + years (locktite) Same Red liquid, same aerobic action, same smell and hopefully works as well. PS: For the people who do not how this type of product works, the product needs air to stay a liquid, if the bottle is full it will set up. You are paying for a given amount not a full bottle. As I always say "If all else fails, try the instructions!"

Scritto da: Eric

Works... Must have patience.

Copper lock delivers with some minor deviation from the instructions Finding this product was heaven sent. I had some work to do in an area where I could not braise. It did take a little time to get it to work correctly without leaking, but I used it on a high pressure gas system with unbelievable success once I got a strategy down. Surprisingly this is an epoxy type product that you can use in place of braising or soldering. In that regard it is pretty strong once cured. The main focus when using this product is that the joint connections must be very clean. Sand down the copper and then clean each joint of with alcohol, the better the clean the better the results. In addition, use a cotton swab to liberly apply to bother the pipe and the connector being mindful to have a good coverage. Lastly, when mating the pieces, be sure to hold the pipe and connecter together for a min until the bond is solid. The instructions say instant, but doing it this way ensures a.leak-free bond. I had a lot of trails with this product but it is an awesome product with a good technique. I would suggest that they rewrite the instructions, but Copper Lock is a winner in my book with the proper technique.

Scritto da: andy

Hvac repairs DYI best friend

This worked very well with my new condenser replacement , this is way easier than using heat equipment and welding, this will bind so strong that you can't break with your arm, the key point is to brush the copper ends well and after job completion with in 20 min do an air suction out of system then add more to the ends and if there is any leak , the suction will cover the leaks, you can heat it up a little to speed up the bond, just hover light heat for a second or 2,

Scritto da: Serge Florant

Un produit indispensable

Pour tous ceux qui ne sont pas capable de souder ou d'installer des tuyaux de cuivre dans des espaces très restreint, ce produit est dispensable.

Scritto da: simon

4 months and holding fast on evaporator install

Replacing an evaporator inside a residential refrigerator