Rain Bird TC/1PKS rezalnik cevi za kapljično namakanje, reže vse velikosti kapljičnih cevi do 3/4” kombinirani rezalnik cevi - 1/4 in 1/2

Brand:Rain Bird

3.4/5

€
46.01

OPIS IZDELKA Rain Bird TC/1PKS rezalnik cevi za kapljično namakanje, reže vse velikosti kapljičnih cevi do 3/4”. Ta visokokakovosten rezalnik cevi enostavno reže vse velikosti kapljičnih cevi, da zadosti edinstvenim potrebam vašega škropilnega in namakalnega sistema. Zagotavlja čiste reze brez nazobčanih robov ali zmečkanin cevi. Kot britev ostro rezilo iz nerjavečega jekla reže hitro in čisto za hitrejše namestitve. Edinstvena zasnova zagotavlja dve različno veliki vdolbini (enega za 1/2 do 3/4 cevi in enega za 1/4 cevi), ki zagotavljata več vzvoda, tako da je za rezanje katere koli cevi potrebna manjša sila! Lahka, a robustna konstrukcija. Ergonomski ročaj služi tudi kot orodje za kopanje jarkov za zakopavanje cevi v mulč ali rahlo zemljo. Odličen za rezanje cevi iz LPDE, vinilnih cevi, cevi za kapljično namakanje, namakalnih cevi, prozornih vinilnih cevi (CVT) in drugih mehkih cevi do zunanjega premera 0,750". Zelo vidna vijolična barva omogoča, da je orodje zlahka vidno v travi, zemlji, lubju itd. Priročna plastična vrečka vsebuje (1) rezalnik cevi. Nadomestno rezilo je mogoče kupiti posebej: PPC-200XBLD. Rain Bird “Inteligentna uporaba vode” OD PROIZVAJALCA Rain Bird Corporation je zasebno podjetje, ustanovljeno leta 1933 med kmetijskim razcvetom v Kaliforniji. Prepoznani smo kot prvi proizvajalec in ponudnik izdelkov in storitev za namakanje na svetu. S prodajnimi pisarnami po vsem svetu; ponujamo več kot 4000 izdelkov za namakanje, ki varčujejo z vodo, v več kot 130 državah. Od samega začetka je Rain Bird proizvajal in ponujal najširšo paleto visokokakovostnih izdelkov za namakanje v industriji za: kmetije, igrišča za golf, športne arene, poslovne objekte in domove. V zadnjih 80 letih je Rain Bird prejel več kot 450 patentov po vsem svetu. Vključno s prvim za namakanje leta 1935 za naš izvirni škropilnik na udarni pogon (ameriški patent št. 1.997.901), ki je revolucioniral kmetijsko pridelavo hrane in uvedel novo dobo v namakanju po vsem svetu. Leta 1990 je Ameriško združenje kmetijskih inženirjev to prvotno udarno škropilnico označilo za zgodovinsko znamenitost. Naši izdelki pokrivajo vse vidike namakanja ... časovnike/krmilnike, izskočne rotacijske brizgalke, izskočne brizgalne brizgalne glave, brizgalne šobe, namakalne ventile, kapljično namakanje, drenažo in še veliko več. Vsi ti izdelki so bili izbrani in nameščeni po vsem svetu v največjih in najprestižnejših projektih za namakanje stanovanjskih, komercialnih, kmetijskih in igrišč za golf. Rain Bird se zavzema za Inteligentno uporabo vode™, pri čemer naša zaveza presega izdelke na izobraževanje, usposabljanje in storitve za industrijo in skupnost. Naša zapuščina je načrtovanje in proizvodnja samo izdelkov najvišje vrednosti in kakovosti. Hvaležni smo, da smo od številnih naših cenjenih partnerjev prejeli številna priznanja. Rain Bird »Pametna raba vode

Znesek

Dodaj v voziček Kupi zdaj

EAN: 0077985002374

kategorije Terasa, travnik in vrt, vrtnarjenje in nega trate, oprema za zalivanje, avtomatska namakalna oprema, Rurke za namakanje,

Uporabite za hitro namestitev. Ergonomski ročaj. Reže kapalne cevi. Rezilo iz nerjavečega jekla. Zelo vidna vijolična barva omogoča, da je orodje zlahka vidno v travi, zemlji, lubju, zastirki itd. Zagotavlja hitrejšo in lažjo namestitev kapalnega sistema. Vsebuje vdolbine, ki zahtevajo manj vzvoda in sile. Kot britev ostro rezilo iz nerjavečega jekla in ergonomski ročaj. Deluje na vseh znamkah 1/4 do 3/4 cevi za kapljično namakanje. Visokokakovostno lahko rezalno orodje; naredi čiste reze brez nazobčanih robov ali zmečkanin cevi.

Country of Origin	Canada
Customer Reviews	4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	TC/1PKS
Item Weight	1.6 ounces
Manufacturer	Rain Bird
Product Dimensions	20.5 x 20.5 x 4.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z^*

Vaša ocena

Scritto da: Sandra

made my job easier

it made my job easier

Scritto da: Angel Douglas

Very small so dont lose it, worked good for what It was needed for

I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.

Scritto da: JS

Slow shipping.

Works great

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Flamsteed

I needed his

I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.

Scritto da: JNK

Blade works great, hole punch not so much

The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.

Scritto da: Saeng Fio Chao

Great handy tool

With all others tool, I find this is the best one

Scritto da: Ed

Don't forget the tool!

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

Scritto da: Annette Dreger

Very easy to use

Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!

Scritto da: Amazon Customer

retour imposible

J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item

Scritto da: DP Kindle Customer

It works!!

Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!

Scritto da: rferraro

Product description is misleading

I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....