VEVOR Standoff Post Base Notranja velikost 5,71 x 5,2 (uporaba za 6 x 6) 316 nerjaveče jeklo Nastavljivo stebričasto stebričasto sidro s površino za risanje vlaken in polnim naborom dodatkov za les grobe velikosti 1 kos

Name: VEVOR Standoff Post Base Notranja velikost 5,71 x 5,2 (uporaba za 6 x 6) 316 nerjaveče jeklo Nastavljivo stebričasto stebričasto sidro s površino za risanje vlaken in polnim naborom dodatkov za les grobe velikosti 1 kos
Brand: VEVOR
SKU: 0768558088450
Price: 74.25 EUR
Availability: InStock

Brand:VEVOR

3.6/5

€
74.25

Obsežne uporabe: Osnovni nosilec za stebre se uporablja tudi za okrasitev v sodobnem slogu, kot so nosilci za palube, ograje za verande, držala za stebre, noge za mizo itd. Popolni dodatki: Vsi potrebni vijaki in ključi so vključeni v dodatke. Stojno podlago morate samo sestaviti na leseno ploščad ali betonska tla. Enostavna montaža: Sestavljanje betonske podlage je varčno in priročno za uporabo. Nosilec podnožja stebra lahko takoj namestite tako, da privijete vijake. Uporaba za 6 X 6 stebrov: Cementna podlaga za stebre je primerna za 6 x 6 stebrov. Standardna velikost lahko zagotovi, da podstavek za beton ne bo zanihal. Poleg tega lahko zagotovi visoko stopnjo varnosti za vašo družino. Trdna podlaga za stebre: Teža vsake podlage: 5,5 lbs/2,5 kg; Velikost nastavljivega sidra je 5,71 x 5,2 x 6,18/14,5 x 13,2 x 15,7 cm (D x Š x V). Mender za stebre je izdelan iz 2 mm nerjavečega jekla z vlaknastim lakom na površini, ki ščiti podnožje stebra pred korozijo.

Znesek

Dodaj v voziček Kupi zdaj

EAN: 0768558088450

kategorije Orodja in pripomočki za dom, Gradbeni material, Stvarni materiali, Ploščadi in ograje, Predpražniki in ograje, Stebri in dodatki, Caps,

Batteries Required?	‎No
Color	‎White
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 44 ratings 4.5 out of 5 stars
Included Components	‎1 x Standoff Post Bases 2 x M6210 Bolts 2 x M880 Bolts 1 x Wrench
Item model number	‎Standoff post base
Item Package Quantity	‎1
Item Weight	‎3.9 pounds
Manufacturer	‎VEVOR
Material	‎Stainless Steel
Part Number	‎Standoff Post Base 6x6 1pcs
Product Dimensions	‎7.5 x 7.1 x 6.3 inches
Size	‎1pcs

5 Star

4 Star

3 Star

2 Star

1 Star

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z^*

Vaša ocena

Scritto da: Robert Perez

Well made

Bought these bases for my front porch columns and they were so easy to install and great quality steal.

Scritto da: JBronc

Great value compared to others

I was surprised how sturdy the Stainless is, and the contents they ship with it. These are a steal compared to other galvanized or stainless steel type fastener. I’ve bought 6, and all of them fit snug on pressure treated 6” x 6” milled lumber, 5.5” x 5.5” ) like you get at your lumber yard or big store. They should not have used the word “rough” lumber when describing the fit, because you will need to shave a half inch or more. Even the milled standard 6” x 6” is sometimes 6 5/8” or greater, and I’ve just taken a grinder with a 40 -60 grit abrasive pad and trimmed it down a bit. Well worth the little effort of labor you need to put in. I used longer 3/8” stainless wedge anchors, because I had them on hand, otherwise they include all the hardware you need. Again, it depends on your application and any codes that are required. I will usually err on the side of caution, and go for thicker and longer hardware ( that’s what she said” ) when possible

Scritto da: jeremy kochan

Higher Quality for Half the Peice

Very happy with price and Quality compared to local hardware

Scritto da: Ranger

Bracket is quite sturdy

It is silly what some makers are charging for construction brackets (zinced steel at that, not stainless). This came packaged like a piece of fine china and with fasteners, and the price was very reasonable. I was a little concerned when I ordered that it might be flimsy, but it is, in fact quite sturdy and well thought out design wise (note arced mounting holes in base). I used it fastened down with a ground anchor over pavers to provide attachment point for a 6 x 6 (nominal, true size 5.625 square) 11' tall cedar post being used to support a sun shade fabric. This nicely provides a moisture break between the pavers at grade and the bottom of the post (sealed, primed and painted) so I have no fear of this post ever rotting, or walking due to wind loads.

Scritto da: Kieran

Inconsistent Size

I ordered and received four of this product. The issue is that the size was inconsistent on the brackets. Two had a measured opening (at the base of the bracket where your post would rest) of 5.5" x 6" and two were about 5" x 5.5". None of the four measured in at the advertised dimensions of 5.71 x 5.2". We had to do some trimming of our posts anyway to make them work with our project, but otherwise I would have returned these (at least the two that weren't big enough to receive 6x6 dimensional lumber). Other than the size issue, the construction quality was very good - nice quality stainless steel, and plenty of hardware. I dislike the concrete anchors that come with and opted to go with locally purchased concrete anchors for additional length/penetration into the concrete.

Scritto da: WLM

Good value.

Worked good for 5x5 posts which didn't present a problem for me as I can cut any size on sawmill.

Scritto da: Eddie Eckard

Good Quality

They are good quality but does not fit a 6x6, measures 5.2 instead.

Scritto da: Nathan Schwoerer

Do not order from this vendor

I recieved two different size brackets one has extra holes in it. The smaller of the two different brackets dosent fit a 6 x 6 post like advertised. Dont buy these.