Wagner Spraytech 02419307 FLEXiO 595 Ročni HVLP razpršilec barve, razprši večino nerazredčenega lateksa, vključuje dve šobi - iSpray in šoba za detajlno obdelavo, popolna prilagodljivost, lahek dizajn FLEXiO 595 razpršilec barve

Brand:Wagner Spraytech

3.2/5

386.93

Razpršilec barve Wagner FLEXiO 595 nanese premaze 10X hitreje kot čopič in prekrije steno 8 x 10 v 5 minutah. Turbina X-Boost zagotavlja moč za brizganje večine nerazredčenih barv in madežev, vključno z barvami in primerji, trdnimi madeži, lepili in še več. Ponuja dosleden, gladek zaključek na številnih projektih zunanjega in notranjega barvanja, kot so ograje, krovi, kuhinjske omare, pohištvo, notranje stene, stropi in drugo. Pršilnik odlikuje kompaktna in lahka zasnova, ki močno zmanjša utrujenost uporabnika in olajša rokovanje pri pršenju. Ima tudi več nastavljivih nastavitev, ki ustrezajo vašim projektnim potrebam, vključno z nastavljivim nadzorom pretoka, širino pršenja, vzorcem pršenja in spremenljivim 9-stopenjskim gumbom za vklop (višje za barve in nižje za madeže). Razpršilnik vključuje tudi dve šobi: šobo iSpray za pršenje širokih površin, kot so stene ali zunanje obloge, in šobo Detail Finish za pršenje gladkega, finega zaključka na projektih, kot so omare in pohištvo. Ko končate, preprosto odklopite razpršilec s turbine s pomočjo priročne tehnologije Lock-N-Go. Razpršilnik je opremljen s podlogami za skodelice in ima nekaj delov, ki se ločijo in čistijo za enostavno čiščenje. Vse se priročno zapakira v vzdržljivo torbico za shranjevanje za naslednjič. Poleg tega dostopajte do Wagner+ za vse informacije, ki jih potrebujete na dlani! Skenirajte kodo QR na svojem izdelku, da boste imeli takojšen digitalni dostop do registracije izdelka, videoposnetkov z navodili in projektov, podaljšanih garancij, priročnikov, informacij o storitvah za stranke in še več!

LAHKA OBLIKA: Ta razpršilec FLEXiO je 10 % lažji od prejšnjih modelov FLEXiO, saj ima kompaktno in lahko zasnovo, s katero je enostavno rokovati. Vključuje tudi dodatno podlogo za skodelice za hitro in enostavno čiščenje. NAPREDNA PRILAGODLJIVOST: Enostavna nastavitev za vsak projekt z 9 nastavitvami hitrosti moči, spremenljivim pretokom barve, nastavljivo širino razpršila ter spremenljivo velikostjo in smerjo vzorca (vodoravno/navpično in široko/ozko). HITRO KONČAJTE PROJEKTE Z VELIKIMI MATERIALI: Ta razpršilec prši 10-krat hitreje kot čopič in lahko prebarva steno 8x10 v 5 minutah. Turbina X-Boost zagotavlja moč za pršenje večine nerazredčenih notranjih in zunanjih barv in madežev s šobo iSpray. PRILOŽENA DVE ŠOBI: šoba iSpray je idealna za pršenje večjih del, kot so stene, stropi in obloge, šoba za obdelavo podrobnosti pa je odlična za majhne projekte in fino končno obdelavo, kot so omare, pohištvo in drugo. POPOLN ZA RAZLIČNE PROJEKTE: razpršilec barve FLEXiO 595 je odličen za nanašanje vrhunskega zaključka na pohištvo, stene, strope, zunanje obloge, ograje, omare, obloge in več.
Batteries Required? ‎No
Brand Wagner Spraytech
Brand ‎Wagner Spraytech
Color Multi-Colored
Color ‎Multi-Colored
Country of Origin ‎China
Customer Reviews 4.2 4.2 out of 5 stars 1,701 ratings 4.2 out of 5 stars
Included Components ‎Flexio 595, iSpray Nozzle, Detail Finish Nozzle, Cup Liner
Item Dimensions LxWxH 18 x 7 x 13.75 inches
Item Dimensions LxWxH ‎18 x 7 x 13.75 inches
Item model number ‎2419307
Item Package Quantity ‎1
Item Weight 8.58 Pounds
Item Weight ‎8.58 Pounds
Manufacturer ‎Wagner Spraytech
Model Name ‎Flexio 595
Part Number ‎2419307
Pattern ‎Paint Sprayer
Power Source ‎dc
Product Dimensions ‎18 x 7 x 13.75 inches
Size ‎FLEXiO 595
Style FLEXiO 595
Style ‎FLEXiO 595
Warranty Description ‎1 year

3.2

10 Review
5 Star
61
4 Star
17
3 Star
9
2 Star
4
1 Star
9

Napišite svojo oceno

Vaš email ne bo objavljen. Vsa obvezna polja so označena z*

Scritto da: John Treble
Best HVLP unit for the money. EZ setup and use.
I've used lesser quality HVLP sprayers before with mixed results. I have a cheapy Graco factory refurb and a new DSP 360 and used them for several projects, but now they both leak or won't spray correctly. Rather than drop a king's ransom on an Earlex or Fuji HVLP, I decided to give the Flexio 5000 a try, as the reviews seemed to be favorable. We are painting our kitchen (Kent Moore cabinets, not cheap stuff) and my wife is hand-priming the face frames in the kitchen whilst I took all of the drawers and doors out to the garage. We didn't want to mask off the kitchen to spray indoors. Everything was washed down with genuine TSP and then sanded with 320 grit 3M sandpaper and rinsed again. I got a gallon of Zinsser 123 primer and thinned it a little until it smoothly ran off the stirring stick. I tested the Detail gun on a flat surface, dialed in the power (about 50%) and started spraying. After priming about 18 doors, I have to say this is a *very* good HVLP spray unit! Since it is humid today (typical Houston spring with a little rain) I need to wait longer for the primer to dry, and then flip all the doors over to prime the fronts. I will edit this review once I have painted on the Behr Cabinet paint. I expect great performance with it too. Clean up is a breeze, and I do suggest the purchase of the cleaning brush set (I got the 22 piece set and it took me only a few minutes to clean up the gun and paint container. I did a full cleaning since it would be over an hour before I can continue spraying. Edit (as promised): This is getting better and better. We bought the Behr Cabinet, Door and Trim paint in the satin sheen. This paint brushes on like butter, but we're not talking about brushing, are we? It sprays on beautifully too, and without thinning! A few things I learned along the way. 1) Strain your paint ALWAYS, 2) Spray on first coat and note the finish when it dries. If a little rough, sand very lightly with 320 grit or higher, 3) Spray next coat a little more slowly to allow a somewhat thicker coat. The Behr Cabinet paint is self-leveling, but you have to make sure the coat is thick enough for that to happen, 4) Check the spray tip often and wipe off any build up, 5) Clean up the gun very thoroughly, even just between coats. We're talking about a very expensive paint job, and you want the sprayer in tip top condition for every coat. 6) The cleaning brush kit was a god-send and made clean up so much better,. In summary, this is a terrific spray kit for the price. If I was a professional cabinet maker, I would probably splurgh on a Fuji sprayer and spend upwards of $1500, but I am a weekend sawdust maker and this unit fits my budget AND gives me great results.
Scritto da: Harte R.
Pleasantly surprised
Picked up this unit to paint some cabinet doors and drawer covers I made. This unit is a snap to set up and easy to use. I used the small spraying unit in this kit as this job is small and didn't require the larger spray unit. I used water based latex paint. The instructions say this type of paint needn't be thinned, but I found that diluting the paint at least 10% gave me a finer spray and better coverage than using the paint straight out of the can. The spray bottle has marking on it so it made dilution easy to figure out. After some practice sprays and minor power adjustments I was ready to go. I did find that I needed to keep the air caps in a horizontal position. When placed in a vertical position, the lower air cap would get paint build up on it and when enough had collected, a blob would spit out on to my workpiece. After my first coats of paint, I covered the nozzle with a napkin soaked in water and covered this with a small plastic bag secured with a velcro band. I figured this would prevent the tip area from drying out. It seemed to work for me and I actually left the entire set up overnight and continued painting in the morning...with no issues! As for clean up, this machine shines. Absolutely simple and easy. Took only minutes to clean everything. With a nice storage case, the entire unit is compact and easily stowed. I haven't used the large spray unit yet so I can't comment on that, but thinking of spraying my garage door so that should work well for that type of job. I doubt I'd use this sprayer for inside walls and such as the prep work needed to handle any over spray is challenging. Because you will get some overspray. I used a spray tent inside my garage and still had some slight overspray issues. I did employ my wood shop air/dust filter to rid the air of overspray particles and found that did a good job in collecting airborne paint particles as the top filter captured a lot of particles. Overall this is a great machine for DIY guys like me. This results turned out good....better than had I used a roller. I highly recommend this unit. And don't forget to wear a good mask!! REVISED: Before starting this job and after unpacking everything I had discovered a small piece of plastic laying in the bottom of the unit case. I wasn't sure what it was or where it came from. I thought it was a left over piece of plastic from the injection process. I almost threw it away. After I finished my job with the small spray unit and packing everything away, I discovered that this small piece of plastic was part of the larger spray unit and was part of the locking mechanism to the hose/handle power unit! (see image) Without this part the large gun will not be secured properly to the hose unit. I contacted customer support and am hoping for a replacement part. Moral of story....check ALL items carefully when unpacking the unit.
Scritto da: LoriM
Nice for diy
This is the first paint sprayer I have ever used. I found it very easy to operate and a much better finish than a paint brush. I recommend watching a few YouTube videos prior to using to get an idea of technique. I have only used on one project so far, the base of a dining room table. I painted it using Valspar oil enriched paint for furniture. I did not need to dilute the paint and got a very nice finish. I will use it next with stain for the top. I am happy with this purchase as this is way better than painting with a brush.
Scritto da: Tim
Wagner
I expected more for the money. The atomization wasn't nearly as fine as the literature said it would be. The controls didn't seem to vary the end result like I expected.
Scritto da: Lisa M. Meyer
Great sprayer. Used for refinishing kitchen cabinets.
Used Flexio 5000 for spraying cabinets and it worked well. Provided a smooth finish without brush / roller marks. I thinned both the primer and Benjamin Moore Advance paint by 10% and was able to get a good atomization and therefore a great looking finish. Cleaning is fairly easy but still takes some time to thoroughly clean. Also had a couple of issues with spray not auto shutting off when trigger was released. After manually moving the trigger back to off position multiple times it started working again and functioned as normal for duration of use. Had this happen 3 times. I recommend this sprayer for DIY projects.
Scritto da: Jenn
Awful waste of time
If you think this is going to help save you time or make painting indoors easier forget it. The sheer amount of masking needed will take longer than rolling, not to mention clean up. It just might be the biggest waste of money I've ever been suckered into.
Scritto da: Simon
Defective or just bad?
I’m hoping I just got a defective item and have ordered a replacement, but the first one had multiple issues. The screw lid on the bottle did not sit flush even before use, it wouldn’t work once paint was in the bottle until I had to use excessive force with my friend and I getting it aligned, it then worked intermittently and finally just became ridiculous as if it was spitting non stop. The final removal of the bottle caused a bad cut to my right wrist over a surgery scar which is now causing nerve pain. And I’m left with a half painted porch. Amazing day. Let’s hope the next one shows signs of being functional before use otherwise it is going back. On the positive side of things, the instructions were very clear.
Scritto da: Laura Barnes
Loved it! Until it broke!!
Great sprayer! I have tried several as I spray furniture regularly. I found this easy to use and did a great job. My only complaint was it died within 4 months of use. I was so disappointed. To find one I really liked, but it didn’t last. I have no idea what happened. The parts(filters) are hard to find and order. I’d recommend, but beware it may only last a few months. Depends on what you need it for. Long term wise, it may not last. But for a big project, I’d definitely recommend. It finishes cabinets beautifully.
Scritto da: Angie
I would recommend it
I’ve only used it a couple of times since it’s too cold to paint. But works well
Scritto da: tony mazzara
Good quality and reliable
This machine is totally worth its value. We have used to paint 52 windows trims , 40 doors with door casing and 2 full kitchens all cabinets painted with no problems at all. This machine performed very well and easy to clean.

Podobni izdelki

hot

Odkrijte našo mednarodno mrežo

Pošiljamo v 28 držav, več kot 200.000 izdelkov. Bodite na tekočem, naročite se na glasilo.

Array